Hey there - Is anyone here interested in using their shortwave radio to download daily images from the International Space Station? It's not difficult to set up, but I haven't been successful with it yet. Here is
a link from the European Space Agency web site where you can learn how
to do it. If you have any success, let me know!
I have not tried to do this but would be interested to hear how you get on. :)
Hey there - Is anyone here interested in using their shortwave radio to download daily images from the International Space Station? It's not
GO> i can do this :) Got a Amateur Licence :)download daily images from the International Space Station? It's not
...I have not tried to do this but would be interested to hear how you get on. :)
You use a little program called RX-SSTV and there are instructions on how
to do it on the ESA web site. Here is the URL -
SEEN-BY: 1/100 101 102 103 104 105 106 107 108 109 110 111 113 114 115 116
156 159 160 161 162 165 166 167 168 200 SEEN-BY: 3/100 4/100 106 5/100
Curios to know if this message is OK for others?
I see this a lot with Mystic echomail messages - and I'm thinking there
is an underlying bug not resolved with Mystic.
Are you referring to the lack of a tear or origin line on this message?
If so, Alonzo will need to make sure that this message base type is set to "Networked" instead of "Local", then Mystic will add those to the message.
Are you referring to the lack of a tear or origin line on this message?
If so, Alonzo will need to make sure that this message base type is set to >> "Networked" instead of "Local", then Mystic will add those to the message.
I actually think it's corrupted packets - which I havent confirmed that it's either the originating system, or the hub (in this case they are both Mystic).
The immediate visual that there is a problem, is that all the SEEN-BY lines are visiible, and there is no origin line.
What is clear tho, is if that packet had other messages after it, they are often lost :(
You don't need a license because you are just receiving, not
transmitting.
Alonzo's message looks OK here, aside from the missing tear and origin lines.
Alonzo's message looks OK here, aside from the missing tear and origin
lines.
So it looks that way as well on Hub 3. Hub 3 got it from Hub 1, as I am assuming you did too.
My BBS got it from Hub 2 (via Hub 1).
If so, Alonzo will need to make sure that this message base type is set
to "Networked" instead of "Local", then Mystic will add those to the
You don't need a license because you are just receiving, not transmitting.
you are right, if you only have a receiver. But if you have a transiver, german law says you need a licence.
Alonzo's message looks OK here, aside from the missing tear and origin >> lines.
So it looks that way as well on Hub 3. Hub 3 got it from Hub 1, as I am assuming you did too.
Yes, so it looks like HUB 1 is good.
My BBS got it from Hub 2 (via Hub 1).
So maybe something happened at hub 2, before it was sent to your BBS?
We'd need to look at messages on hub 2 to be sure.
--- BBBS/Li6 v4.10 Toy-6
* Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106)
@TID: Mystic BBS 1.12 A47
@MSGID: 21:1/130 7782b983
@REPLY: 21:1/101 f9f4f831
@TZUTC: -0500
@SEEN-BY: 1/100 101 102 103 104 105 106 107 108 109 110 111 113 114 115 116 117
@SEEN-BY: 1/118 119 120 121 122 124 125 126 127 128 129 131 133 134 135 136 137
@SEEN-BY: 1/138 139 140 141 142 143 144 145 147 148 149 150 152 154 155 157 158
@SEEN-BY: 1/159 160 161 162 163 164 166 168 169 171 172 173 174 175 176 177 179
@SEEN-BY: 1/180 181 182 183 184 185 186 187 189 190 191 193 194 195 197 198 199
@SEEN-BY: 1/200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216
@SEEN-BY: 1/217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233
@SEEN-BY: 1/234 235 236 237 238 616 995 2/100 1202 3/100 4/100 106 5/100 @PATH: 1/100
I have not tried to do this but would be interested to hear how you g on. :)
You use a little program called RX-SSTV and there are instructions on how to do it on the ESA web site. Here is the URL -
@TID: Mystic BBS 1.12 A47
@MSGID: 21:1/130 7782b983
@REPLY: 21:1/101 f9f4f831
@TZUTC: -0500
I have not tried to do this but would be interested to hear how
you get on. :)
You use a little program called RX-SSTV and there are instructions on
how to do it on the ESA web site. Here is the URL -
SEEN-BY: 1/100 101 102 103 104 105 106 107 108 109 110 111 113 114 115
116 117
SEEN-BY: 1/118 119 120 121 122 124 125 126 127 128 129 131 133 134 135
136 137
SEEN-BY: 1/138 139 140 141 142 143 144 145 147 148 149 150 152 154 155
157 158
SEEN-BY: 1/159 160 161 162 163 164 166 168 169 171 172 173 174 175 176
177 179
SEEN-BY: 1/180 181 182 183 184 185 186 187 189 190 191 193 194 195 197
198 199
SEEN-BY: 1/200 201 202 203 204 205 206 207 208 209 210 211 212 213 214
215 216
SEEN-BY: 1/217 218 219 220 221 222 223 224 225 226 227 228 229 230 231
232 233
SEEN-BY: 1/234 235 236 237 238 616 995 2/100 1202 3/100 4/100 106
5/100
@PATH: 1/100
...and this is the same thing I see in GoldEd at 1/100
On 05 Feb 2023, Alonzo said the following...
@TID: Mystic BBS 1.12 A47
@MSGID: 21:1/130 7782b983
@REPLY: 21:1/101 f9f4f831
@TZUTC: -0500
@SEEN-BY: 1/100 101 102 103 104 105 106 107 108 109 110 111 113 114 115
116 117
@SEEN-BY: 1/118 119 120 121 122 124 125 126 127 128 129 131 133 134 135
136 137
@SEEN-BY: 1/138 139 140 141 142 143 144 145 147 148 149 150 152 154 155
157 158
@SEEN-BY: 1/159 160 161 162 163 164 166 168 169 171 172 173 174 175 176
177 179
@SEEN-BY: 1/180 181 182 183 184 185 186 187 189 190 191 193 194 195 197
198 199
@SEEN-BY: 1/200 201 202 203 204 205 206 207 208 209 210 211 212 213 214
215 216
@SEEN-BY: 1/217 218 219 220 221 222 223 224 225 226 227 228 229 230 231
232 233
@SEEN-BY: 1/234 235 236 237 238 616 995 2/100 1202 3/100 4/100 106 5/100
@PATH: 1/100
I have not tried to do this but would be interested to hear how you g
on. :)
You use a little program called RX-SSTV and there are instructions on how
to do it on the ESA web site. Here is the URL -
That's all I can see when logged in at the HUB.
Re: Space Station stuff
By: Avon to Avon on Wed Feb 15 2023 09:44 pm
...and this is the same thing I see in GoldEd at 1/100
So, if I've followed this correctly, then:
* it either left the orginating system as a bad packet and hub 2
forwarded it on, or
* as hub 2 processed it, it became bad.
Sysop: | Immortal |
---|---|
Location: | Spanish Fork, UT |
Users: | 16 |
Nodes: | 10 (0 / 10) |
Uptime: | 17:30:13 |
Calls: | 560 |
Files: | 3,435 |
Messages: | 103,370 |